Somfy

Troubleshooting: Somfy ST40 and ST50 Motors

The shade loses its limits after programming. Make sure to complete the programming sequence to set limits. The shade won’t work. Make sure the motor has power.Check the wiringIf the shade has been cycled repeatedly, the thermal overload protection may have kicked in....

Somfy ST40 and ST50 Programming Guide

Note: These instructions start as if the shade has never been programmed. If the shade has been previously programmed or needs to go back to factory default (so you can start from the beginning) please follow the “Resetting to Factory Default” directions before...

Troubleshooting: Somfy ST30 Motor

The shade loses its limits after programming. Make sure to complete the programming sequence to set limits. The shade won’t work. Make sure the motor has power.Check the connection from the motor to the power source. Make sure the positive (+) and the negative (-) are...

Somfy ST30 Programming Guide

Note: These instructions start as if the shade has never been programmed. If the shade has been previously programmed or needs to go back to factory default (so you can start from the beginning) please follow the “Resetting To Factory Default” directions before...

Troubleshooting: Somfy Li-On Motors

The motor is not responding. Make sure the motor is charged up.Make sure the controller has a good battery and is installed correctly.Adjust the antenna on the motor.Make sure the distance from the remote to the shade is in range.Reset and reprogram the shade....